Beko DCU 9330 User Manual download pdf (Page 6)

2 Important safety instructions

This section includes safety information

that will help protection from risks of

personal injuries or materialistic damages.

Failure to follow these instructions

shall cause any warranty and reliability

commitment to become void.

General safety

• Never place the machine on a carpet-

covered floor, otherwise, lack of airflow

beneath the machine may cause

electrical parts to overheat. This will

cause problems with your machine.

• If the power cable or mains plug is

damaged, you must call Authorised

Service Agent for repair.

• The product should not be plugged

in during installation, maintenance

and repair works. Such works should

always be made by the technical

service. Manufacturer shall not be held

responsible for damages arising from

processes carried out by unauthorised

persons.

• Connect the product to a grounded

outlet protected by a fuse of suitable

capacity as stated in the technical

specifications table.

• Operate your product at temperatures

between +5°C and +35°C.

• Do not use electrical devices in the

product.

• Do not connect the air exit of the

product to the exit ducts which are

used for the exhaust fumes of the

devices operating with gas or other

types of fuel.

• You must provide enough ventilation

in order to prevent gases exiting from

devices operating with other types of

fuels including the naked flame from

accumulating in the room due to the

back fire effect.

• Always clean the lint filter before or after

each loading.

• Never operate your dryer without the

lint filter installed.

• Do not allow fibre, dust and dirt

accumulation around the exhaust exit

and at adjacent areas.

• Power cable plug must be within easy

reach after installation.

• Do not use extension cords, multi-plugs

or adaptors to connect the dryer to

power supply in order to decrease the

risk of electric shock.

• Do not make any changes on the plug

supplied with the product. If it is not

compatible with the socket, have a

qualified electrician change the socket

with a suitable one.

• Items cleaned or washed with gasoil/

fuel oil, dry-laundry solvents and other

combustible or explosive materials as

well as the items that are contaminated

or spotted with such materials should

not be dried in the product since they

emit flammable or explosive vapor.

• Do not dry items cleaned with industrial

chemicals in the dryer.

• Do not dry unwashed items in the dryer.

• Items soiled with cooking oils,

acetone, alcohol, fuel oil, kerosene,

stain remover, turpentine, paraffin and

paraffin removers must be washed

in hot water with plenty of detergent

before being dried in the dryer.

• Garments or pillows bolstered with

rubber foam (latex foam), shower

bonnets, water resistant textiles,

materials with rubber reinforcement and

rubber foam pads should not be dried

in the dryer.

• Do not use fabric softeners and

anti-static products unless they are

recommended by the manufacturers of

the fabric softener or the product.

• This product must be earthed.

Grounding installation decreases the

risk of electric shock by opening a path

with low resistance for the electricity

flow in case of a malfunction or failure.

Power cable of this product is equipped

with a conductor and a grounding

plug that allows for grounding the

product. This plug must be installed

appropriately and inserted into a socket

which is grounded in accordance with

the local laws and regulations.

• Do not install the product behind a door

with a lock, sliding door or a door that

has a hinge against the hinge of the

dryer.

• Do not install or leave this product

in places where it will be exposed to

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Beko DCU 9330 User Manual Page 6

Comments to this Manuals

Related products and manuals for Tumble dryers Beko DCU 9330