Beko DCU 9330 User Manual download pdf (Page 20)

20

EN

displayed

Ending the programme through

cancelling

A new programme can be selected and

started after “Programme cancel” is

activated in order to change the drying

programme.

To cancel any selected programme:

Press “Start/Pause/Cancel” button for

about 3 seconds. “Lint filter cleaning” and

“Water tank” warning symbols light up and

“End” label appears on the screen as a

reminder at the end of this period.

A As the inside of the machine will be

excessively hot when you cancel

the programme while the machine

is running, activate the ventilation

programme to cool it down.

C If you change the position of

programme selection knob while your

machine is running, then the machine

stops, current programme is cancelled

and new programme information is

displayed.

End of programme

“Filter cleaning” and “Water tank” warning

symbols light up and “End” label appears

on the screen in the programme follow-

up indicator when the programme ends.

The door can be opened and the machine

becomes ready for a second cycle.

Press “On/Off” button to turn off the dryer.

C When selected, the 2-hour anti creasing

programme will be activated to prevent

laundry from creasing if you do not take

the laundry out after the programme

has come to an end.

C Clean the filter after each drying (please

see, Filter cleaning).

C Drain the water tank after each drying

(please see, Water tank)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments