Beko DCU 9330 User Manual download pdf (Page 19)

19

EN

“Freshen up”:

- Illuminates when the programme ends.

C Anti-creasing icon will light up at the

end of the programme if anti-creasing

function is active.

Changing the programme after the

programme has started

You can use this feature to dry your

laundry in a different programme after your

machine has started to run.

For example;

Press and hold the “Start/Pause/Cancel”

button for about 3 seconds to “Cancel”

the programme in order to select “Extra

Dry” programme instead of “Iron Dry”

programme. Select the “Extra Dry”

programme by rotating the programme

knob. Press “Start/Pause/Cancel” button

to start the programme.

C If you select a new programme by

turning the programme selection knob

while your machine is running, then

the current programme is cancelled

and new programme information is

displayed.

Adding/removing laundry in

standby mode

In order to add or take out laundry after

the start-up of the programme;

1. Press the “Start/Pause/Cancel” button

to switch the machine to “Pause”

mode. Drying process will stop.

2. Open the door at Pause position and

close it again after adding or taking out

laundry.

3. Press “Start/Pause/Cancel” button to

start the programme.

C Any laundry added after the drying

process was started may cause the

already dried clothes in the machine

intermingle with wet clothes and the

result will be wet laundry after the

drying process is over.

CLaundry may be added or taken out

as much as desired during a drying

process, but as this process will

interrupt drying continuously, it will

extend the programme duration and

increase energy consumption.

Therefore, it is recommended to add

laundry before the drying programme

has started.

C If you select a new programme by

turning the programme selection knob

while your machine is in standby, then

the current programme is cancelled

and new programme information is

displayed.

Child-proof lock

There is a child-proof lock to prevent

any programme interruption due to the

pressing of button while the programme is

running. The loading door and all button

except the “On/Off” button on the panel

are deactivated when the child-proof lock

is active.

In order to activate the child-proof lock,

press on the “audio warning” and “anti-

creasing” buttons simultaneously for 3

seconds.

To start a new programme after the

programme is over or to interrupt the

programme, the child-proof lock should be

deactivated. Press the same buttons for

3 sec. again to deactivate the child-proof

lock.

Lock symbol will appear on the screen

when the child-proof lock is activated.

C Child-proof lock will also be deactivated

when the machine is restarted by

pressing the on/off button.

When the child-proof lock is activated:

• Display icons will not change even if the

position of programme selection knob

is changed while the machine is running

or in halt.

• If the child-proof lock is deactivated

after changing the position of the

programme selection knob while your

machine is running, your machine stops

and new programme information is

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comments to this Manuals

No comments