Beko WMB 61243 PTE User Manual download pdf (Page 34)

34 / EN

Washing Machine / User‘s Manual

Maintenance and cleaning

3. Some of our products have emergency draining

hose and some does not have. Follow the steps

below to discharge the water.

Discharging the water when the product has an

emergency draining hose:

a. Pull the emergency draining hose out from its

seat

b. Place a large container at the end of the hose.

Drain the water into the container by pulling

out the plug at the end of the hose. When the

container is full, block the inlet of the hose

by replacing the plug. After the container is

emptied, repeat the above procedure to drain

the water in the machine completely.

c. When draining of water is finished, close the end

by the plug again and fix the hose in its place.

d. Turn the pump filter to take it out.

Discharging the water when the product does not

have an emergency draining hose:

a. Place a large container in front of the filter to

catch water from the filter.

b. Loosen pump filter (anticlockwise) until water

starts to flow. Fill the flowing water into the

container you have placed in front of the filter.

Always keep a piece of cloth handy to absorb

any spilled water.

c. When the water inside the machine is finished,

take out the filter completely by turning it.

4. Clean any residues inside the filter as well as

fibers, if any, around the pump impeller region.

5. Install the filter.

6. If the filter cap is composed of two pieces, close

the filter cap by pressing on the tab. If it is one

piece, seat the tabs in the lower part into their

places first, and then press the upper part to

close.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41

No comments

Beko WMB 61243 PTE User Manual Page 34