Beko WMB 61243 PTE User Manual download pdf (Page 33)

Washing Machine / User‘s Manual

33 / EN

Maintenance and cleaning

7.3 Cleaning the body

and control panel

Wipe the body of the machine with soapy water or

non-corrosive mild gel detergents as necessary,

and dry with a soft cloth.

Use only a soft and damp cloth to clean the control

panel.

7.4 Cleaning the water intake filters

There is a filter at the end of each water intake

valve at the rear of the machine and also at the

end of each water intake hose where they are

connected to the tap. These filters prevent foreign

substances and dirt in the water to enter the

washing machine. Filters should be cleaned as

they do get dirty.

1. Close the taps.

2. Remove the nuts of the water intake hoses to

access the filters on the water intake valves.

Clean them with an appropriate brush. If the

filters are too dirty, take them out by means of

pliers and clean them.

3. Take out the filters on the flat ends of the water

intake hoses together with the gaskets and

clean thoroughly under running water.

4. Replace the gaskets and filters carefully in their

places and tighten the hose nuts by hand.

7.5 Draining remaining water

and cleaning the pump filter

The filter system in your machine prevents solid

items such as buttons, coins and fabric fibers

clogging the pump impeller during discharge of

washing water. Thus, the water will be discharged

without any problem and the service life of the

pump will extend.

If the machine fails to drain water, the pump filter

is clogged. Filter must be cleaned whenever it

is clogged or in every 3 months. Water must be

drained off first to clean the pump filter.

In addition, prior to transporting the machine

(e.g., when moving to another house) and in case

of freezing of the water, water may have to be

drained completely.

WARNING: Foreign substances left

in the pump filter may damage your

machine or may cause noise problem.

In order to clean the dirty filter and discharge the

water:

1. Unplug the machine to cut off the supply power.

WARNING: Temperature of the water

inside the machine may rise up to 90 ºC.

To avoid burning risk, filter must be

cleaned after the water in the machine

cools down.

2. Open the filter cap.

If the filter cap is composed of two pieces, press

the tab on the filter cap downwards and pull the

piece out towards yourself.

If the filter cap is one piece, pull the cap from both

sides at the top to open.

You can remove the filter cover by slightly

pushing downwards with a thin plastic

tipped tool, through the gap above the

filter cover. Do not use metal tipped tools

to remove the cover.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Comments to this Manuals

No comments

Beko WMB 61243 PTE User Manual Page 33

Comments to this Manuals

Related products and manuals for Washing machines Beko WMB 61243 PTE