Beko WMB 61243 PTE User Manual download pdf (Page 38)

38 / EN

Washing Machine / User‘s Manual

Troubleshooting

There is detergent left on the laundry. (**)

• Excessivelaundrywasloadedin.>>>Do not load the machine in excess.

• Wrongprogrammeandtemperaturewereselected.>>>Select the proper programme and temperature for the

laundry to be washed.

• Wrongdetergentwasused.>>>Select the proper detergent for the laundry to be washed.

Too much foam forms in the machine.(**)

• Improperdetergentsforthewashingmachinearebeingused.>>>Use detergents appropriate for the washing

machine.

• Excessiveamountofdetergentisused.>>>Use only sufficient amount of detergent.

• Detergentwasstoredunderimproperconditions.>>>Store detergent in a closed and dry location. Do not store

in excessively hot places.

• Somemeshedlaundrysuchastullemayfoamtoomuchbecauseoftheirtexture.>>>Use smaller amounts of

detergent for this type of item.

• Detergentisputinthewrongcompartment.>>>Put the detergent in the correct compartment.

• Softenerisbeingtakenearly.>>>There may be problem in the valves or in the detergent dispenser. Call the

Authorized Service Agent.

Foam is overflowing from the detergent drawer.

• Toomuchdetergentisused.>>>Mix 1 tablespoonful softener and ½ l water and pour into the main wash

compartment of the detergent drawer.

• Putdetergentintothemachinesuitablefortheprogrammesandmaximumloadsindicatedinthe“Programme

and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the

amount of detergent.

Laundry remains wet at the end of the programme (*)

• Excessivefoammighthaveoccurredandautomaticfoamabsorptionsystemmighthavebeenactivateddueto

toomuchdetergentusage.>>>Use recommended amount of detergent.

* Machine does not switch to spinning step when the laundry is not evenly distributed in the drum

to prevent any damage to the machine and to its surrounding environment. Laundry should be

rearranged and re-spun.

** Regulardrumcleaningisnotapplied.>>>Cleanthedrumregularly.Forthis,pleasesee7.2.

WARNING: If you cannot eliminate the problem although you follow the instructions in this section,

consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product

yourself.

Machine does not start. Nothing appears on the display.

Machinemaybeunplugged.>>>Check the plug and attach it to the socket.

Fusemaybedefective.>>>Check the fuse and have it replaced by a qualified electrician if necessary.

Powermaybeout.>>>Check if there is any power outage.

On/Offbuttonmightnotbepressed.>>>Press On / Off button.

Machine does not start when Start / Pause / Cancel button is pressed after selecting the programme.

Loadingdoormaybeopen.>>>Close the loading door.

Rinse symbol flashes in the display. (No Water symbol may also be lit depending on the model of your

machine).

Watermaybecutoff.>>>Make sure that the water is not cut off and press Start / Pause / Cancel button

again to start your machine.

1 2 ... 33 34 35 36 37 38 39 40 41

Comments to this Manuals

No comments

Beko WMB 61243 PTE User Manual Page 38

Comments to this Manuals

Related products and manuals for Washing machines Beko WMB 61243 PTE