Beko WMB 61243 PTE User Manual download pdf (Page 30)

30 / EN

Washing Machine / User‘s Manual

Operating the product

5.17 Child Lock

Use Child Lock function to prevent children from

tampering with the machine. Thus you can avoid

any changes in a running programme.

You can switch on and off the machine

with On / Off button when the Child Lock

is active. When you switch on the machine

again, programme will resume from where

it has stopped.

To activate the Child Lock:

Press and hold 2

and 4

Auxiliary Function

buttons for 3 seconds. “Con” appears on the

display.

Same phrase will appear on the display

if you press any button when Child Lock

is enabled.

To deactivate the Child Lock:

Press and hold 2

and 4

Auxiliary Function

buttons for 3 seconds. “COFF” appears on the

display.

Do not forget to disable the child lock

at the end of the programme if it was

enabled before. Otherwise, machine will

not allow to select a new programme.

5.18 Cancelling the programme

Press and hold Start / Pause / Cancel button for 3

seconds. Start symbol flashes. Symbol of the step

at which the programme was cancelled remains lit.

"END" appears on the display and the programme

is cancelled.

If you want to open the loading door after

you have cancelled the programme but it

is not possible to open the loading door

since the water level in the machine is

above the loading door opening, then

turn the Programme Selection knob to

Pump+Spin programme and discharge

the water in the machine.

5.19 Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol illuminates

when the machine is in Rinse Hold mode.

If you want to spin your laundry when the machine

is in this mode:

Adjust the spin speed and press Start / Pause /

Cancel button. Pause symbol disappears and Start

symbol appears. Programme resumes, discharges

the water and spins the laundry.

If you only want to drain the water without

spinning:

Just press Start / Pause / Cancel button. Pause

symbol disappears. Start symbol appears.

Programme resumes and discharges the water

only.

5.20 End of programme

“End” appears on the display at the end of the

programme. Symbols of the programme steps

remain lit. Auxiliary function, spin speed and

temperature that were selected at the beginning of

the programme remain selected.

5.21 Your machine is equipped

with a “Standby Mode”

In case of not starting any programme or waiting

without making any other operation when the

machine is turned on by On/Off button and while

it is in selection step or if no other operation is

performed approximately 2 minutes after the

programme you selected has come to an end, your

machine will automatically switch to energy saving

mode. Display brightness will decrease. In case of

rotating the Programme Selection knob or pressing

any button, lights will restore to their previous

condition. This is not a fault.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 40 41

Comments to this Manuals

No comments

Beko WMB 61243 PTE User Manual Page 30

Comments to this Manuals

Related products and manuals for Washing machines Beko WMB 61243 PTE