Beko WMI 71241 User Manual download pdf (Page 26)

26

EN

6 Maintenance and cleaning

Service life of the product extends and

frequently faced problems decrease if

cleaned at regular intervals.

Cleaning the detergent drawer

Remove any powder residue buildup in

the drawer. To do this;

1

2

3

4

1. You can remove the detergent drawer

by pulling it towards yourself strongly.

C

If more than a normal amount of

softener and liquid detergent mixture

starts to remain in the softener

compartment, the siphon must be

cleaned.

2. Wash the drawer and the siphon

with plenty of lukewarm water in a

washbasin. Wear protective gloves

or use an appropriate brush to avoid

touching the residues in the drawer

when cleaning.

3. Replace the drawer into its housing

after cleaning. Check if the siphon is

in its original location.

Cleaning the loading

door and the drum

Residues of softener, detergent and

dirt may accumulate in your machine in

time and may cause unpleasant odours

and washing complaints. To avoid this,

use the Drum Cleaning programme. If

your machine is not featured with Drum

Cleaning programme, use Cottons-90

programme and select Additional Water

or Extra Rinse auxiliary functions as

well. Before starting the programme,

put max. 100 g of powder anti-

limescale into the main wash detergent

compartment (compartment nr. II). If

the anti-limescale is in tablet form, put

only one tablet into compartment nr. II.

Dry the inside of the bellow with a clean

piece of cloth after the programme has

come to an end.

C

Repeat Drum Cleaning process in

every 2 months.

C

Use an anti-limescale suitable for

the washing machines.

After every washing make sure that no

foreign substance is left in the drum.

If the holes on the bellow shown in the

figure is blocked, open the holes using

a toothpick.

C

Foreign metal substances in your

machine will cause rust stains.

Clean the stains on the drum

surface by using cleaning agents for

stainless steel. Never use steel wool

or wire wool.

Cleaning the body

and control panel

Wipe the body of the machine with

soapy water or non-corrosive mild gel

detergents as necessary, and dry with a

soft cloth.

Use only a soft and damp cloth to clean

the control panel.

A

Never use sponge or scrub

materials. These will damage the

painted and plastic surfaces.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Comments to this Manuals

No comments