Beko BUDL 700 Specifications download pdf (Page 30)

Technical description

30 DRYPOINT

RS 15 – 1700 HP50 NA

5.21. Electronic level controlled condensate drain BEKOMAT

The electronic level controlled drain BEKOMAT has a special condensate management that makes sure that

condensate is drained safely without any unnecessary air-loss. This drain consists of a condensate accumulator where

a capacitive sensor continuously checking liquid level is placed: as soon as the accumulator is filled, the sensor passes

a signal to the electronic control and a diaphragm solenoid valve will open to discharge the condensate. Right in time

the discharge line will be closed again without wasting compressed air.

ATTENTION!

These BEKOMAT condensate drains have been specially designed for the use in a refrigerant dryer DRYPOINT RS

HP50 NA. Any Installation in other compressed air treatment units or the exchange against a different drain brand may

lead to malfunction. Do not exceed the max. operating pressure (see type plate)!

Make sure when the dryer starts the upstream valve is open.

NOTE:

For detailed information on drainer functions, troubleshooting, service and replacement parts, please refer to

the BEKOMAT drainer manual.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

No comments

Beko BUDL 700 Specifications Page 30