Beko TSE1283 Datasheet download pdf (Page 12)

EN

11

Installation (Under the

counter)

• Internal height of the counter should

be 820mm.

(!) Cookers or other heat sources

must not be placed above the counter

where the appliance is installed under

the counter.

• The mains wall socket plug must be

close to the right or left hand side of

the appliance.

• Remove the top cover of the

appliance. There are 4 screws(2 pieces

at the back, 2 pieces below the front

edge) that should be removed.

Fig. 1

• Cut the part shown in the picture and

then remove it by the help of pliers.

• Place you appliance under the

counter and adjust the front feets until

its top touches to the counter.

In order to use the product under the

counter, the distance between the wall

and the reference indicated in the top

connection plastic must be minimum

595 mm.

Fig. 2-3

• Fix the appliance under the counter

by using 2 of the screws that was

removed from the top cover.(Material

of the counter must be plastics or

wood based!)

Fig. 4

Adjusting the legs

If your refrigerator is unbalanced;

You can balance your refrigerator by

turning the front legs of it as illustrated

in the figure. The corner where the

leg exists is lowered when you turn

it the direction of black arrow and

raised when you turn in the opposite

direction. Taking help from someone to

slightly lift the refrigerator will facilitate

this process.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Comments to this Manuals

No comments