Beko WMB 91242 LC User Manual download pdf (Page 27)

27

EN

6 Maintenance and cleaning

Service life of the product extends and

frequently faced problems decrease if

cleaned at regular intervals.

Cleaning the detergent drawer

Clean the detergent drawer at regular

intervals (every 4-5 washing cycles)

as shown below in order to prevent

accumulation of powder detergent in

time.

1. Press the dotted point on the siphon

in the softener compartment and pull

towards you until the compartment is

removed from the machine.

C

If more than normal amount of water

and softener mixture starts to gather

in the softener compartment, the

siphon must be cleaned.

2. Wash the detergent drawer and the

siphon with plenty of lukewarm water

in a washbasin. Wear protective

gloves or use an appropriate brush to

avoid touching of the residues in the

drawer with your skin when cleaning.

3. Insert the drawer back into its place

after cleaning and make sure that it is

seated well.

Cleaning the loading

door and the drum

Residues of softener, detergent and

dirt may accumulate in your machine in

time and may cause unpleasant odours

and washing complaints. To avoid this,

use the Drum Cleaning programme. If

your machine is not featured with Drum

Cleaning programme, use Cottons-90

programme and select Additional Water

or Extra Rinse auxiliary functions as well.

Before starting the programme, put

max. 100 g of powder anti-limescale into

the main wash detergent compartment

(compartment nr. II). If the anti-limescale

is in tablet form, put only one tablet into

compartment nr. II. Dry the inside of the

bellow with a clean piece of cloth after

the programme has come to an end.

C

Repeat Drum Cleaning process in

every 2 months.

C

Use an anti-limescale suitable for

the washing machines.

After every washing make sure that no

foreign substance is left in the drum.

If the holes on the bellow shown in the

figure is blocked, open the holes using

a toothpick.

C

Foreign metal substances in your

machine will cause rust stains.

Clean the stains on the drum

surface by using cleaning agents for

stainless steel. Never use steel wool

or wire wool.

Cleaning the body

and control panel

Wipe the body of the machine with

soapy water or non-corrosive mild gel

detergents as necessary, and dry with a

soft cloth.

Use only a soft and damp cloth to clean

the control panel.

A

Never use sponge or scrub

materials. These will damage the

painted and plastic surfaces.

Cleaning the water

intake filters

There is a filter at the end of each water

intake valve at the rear of the machine

and also at the end of each water

intake hose where they are connected

to the tap. These filters prevent foreign

substances and dirt in the water to

enter the washing machine. Filters

should be cleaned as they do get dirty.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 72 73

Comments to this Manuals

No comments