Beko CFD6914AP Instruction Manual download pdf (Page 20)

EN

20

Safety lock for Water Dispenser

You may use the lock in order to avoid

small children tampering with the water

dispenser. To do this, slide the locking

latch from left to right as illustrated in

the figure. You must slide the latch

back to left position in order to use the

water dispenser.

To avoid accidental water dispensing,

we recommend you to lock the water

dispenser.

UNLOCK LOCK

Cleaning the water tank

Remove the water tank, open the

latches on both sides and detach the

top cover mechanism from the water

tank. Clean the water tank with warm

clean water, reinstall the top cover

mechanism and fasten the latches.

When installing the water tank, make

sure that hooks behind it fits securely

into the hangers on the door. Make

sure that parts removed during

cleaning (if any) are installed correctly

into their original locations. Otherwise,

water may leak.

Important:

Water tank and components of water

dispenser are not dishwasher-proof.

Water tray

Water that drips while using the water

dispenser accumulates in the drip tray

housing.Remove the drip tray firstly

pressing up from the front edge then

pulling towards yourself.Then clean

drip housing with an absorbent cloth

or sponge.

Maximum height of glass suitable

for use with Stored Water Dispenser

is 16 cm which includes most of the

“Standard” pint glasses.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments