Beko BDC 643 Service Manual

EN - english Instructions for installation and operationData DisplayDD109

Plug reverse side 10 Data Display DD109 8 Plug reverse side Supply: AWG12 – AWG24, cable cross-sections: 0.2 ... 2.5 mm2Signals: AWG16 ... AWG28

Analogue current signal Data Display DD109 11 10.2 Alarm connection NC and COM are closed in case of: - alarm - power failure - sensor break 11 A

Galvanic isolated pulse output 12 Data Display DD109 12 Galvanic isolated pulse output A galvanic isolated pulse output is available for the flow

Operation Data Display DD109 13 14 Operation The measured values will be indicated page by page. Depending on the sensor and the settings one or se

Operation 14 Data Display DD109 14.2 Operation of the main keys 14.2.1 Concept for key operation • use these keys to browse and select different

Operation Data Display DD109 15 14.3.1 Selection fields • Options for selection of the parameters  - Selection field for deselected point  - S

Operation 16 Data Display DD109 14.5 Main menu points The data display is supplied with standard settings. Main menu points in the data display:

Scope of delivery Data Display DD109 17 14.5.2 Alarm settings It is possible to set 2 individual alarm thresholds: 1. “Set Alarm 1 threshold” 2. ”S

Conformity declaration 18 Data Display DD109 16 Conformity declaration

Conformity declaration Data Display DD109 19 BEKO TECHNOLOGIES GMBH 41468 Neuss, GERMANY Phone: +49 2131 988-0 www.beko.de EC Declaration of Conf

2 Data Display DD109 Dear customer, Thank you very much for deciding in favour of the data display DD109. Please read this installation and operation

20 Data Display DD109 AActive high ...12 Active low...

Conformity declaration Data Display DD109 21

22 Data Display DD109

Conformity declaration Data Display DD109 23

Technical changes and errors excepted. DD109_manual_en_2009-03

Table of contents Data Display DD109 3 1 Safety instructions 4 2 Field of application 6 3 Functions of the data display 6 4 Data display with se

Safety instructions 4 Data Display DD109 1 Safety instructions Please check whether this manual corresponds with the instruments type. Please obser

Safety instructions Data Display DD109 5 Further safety instructions: • Also the applicable national regulations and safety instructions have to be

Field of application 6 Data Display DD109 2 Field of application • The data display is a stationary display instrument with data logger e. g. for co

Technical data Data Display DD109 7 5 Technical data Dimensions wall housing Dimensions: 4.65“ x 4.53“ x 3.66“ Dimensions panel mounting Dimensi

Dimensions 8 Data Display DD109 6 Dimensions Dimensions wall housing 118,0 mm = 4,65“ 92,0 mm = 3,62“ 115,0 mm = 4,53“ 107,5 mm = 4,23“ 133,

Mounting Data Display DD109 9 7 Mounting Mounting wall housing: The cables for sensors and for the power supply are already wired at DD10: • Do not